Glacier FarmMedia – The Canadian Food Inspection Agency (CFIA) published a new policy titled “Pre-chill microbiological monitoring program for raw poultry,” at the end of August.
All Safe Food for Canadians (SFC) licence holders who are slaughtering poultry are expected to implement the pre-chill microbiological monitoring program by Dec. 1, 2025. Currently, the scope of this program is limited to poultry carcasses.
WHY IT MATTERS: The CFIA’s new policy comes into force Dec. 1, 2025, for Canada’s poultry sector.
Live birds bring a load of pathogens in the intestine to the slaughter process. Every stage from the hanging of the carcass in live receiving to its entrance into the chiller has the potential to influence the microbial load on the final product.
Read Also
Keep it clean on pre-harvest chemical use
Canadian farmers urged to toe the line on pre-harvest pesticide application and market product restrictions to avoid grain marketing headaches.
Monitoring the microbial load at a defined point before carcasses are in their pre-chill mode allows for a more precise evaluation of contamination control measures applied during the dressing and evisceration stages.
Data generated through the pre-chill microbiological monitoring program is intended to drive science-based decisions within an operator’s food safety system to optimize interventions and enhance food safety. This information will empower license holders to verify the effectiveness of their control measures, validate the impact of process changes and optimize interventions, including microbial interventions, equipment sanitation protocols and adjustments to evisceration techniques. License holders will also be able to demonstrate ongoing compliance with the Preventive Control Plan requirements under the Safe Food for Canadians Regulations. When operators establish their internal performance baseline using pre-chill microbiological monitoring data, they will be able to allow businesses to track their own performance over time, identify shifts in process control and pursue improvement initiatives.
Pre-chill or early-stage microbiological monitoring can be integral components of comprehensive poultry safety management systems. Authorities like the United States Department of Agriculture’s Food Safety and Inspection Service (USDA FSIS) incorporate requirements for microbiological monitoring at various stages, including consideration of pre-chill data, to verify process control in poultry slaughter establishments.
The CFIA developed the following microbiological sampling measures to help food businesses comply with section 47 and 89 (1)(c) of the Safe Food for Canadians Regulations. The implementation of the pre-chill microbiological monitoring program supports direct compliance with hazard identification and analysis, which requires operators to identify and analyze biological hazards such as indicator organisms that reflect potential fecal or environmental contamination, which can pose a risk to the contamination of food.
Operators are also required to follow hazard control measures to prevent, eliminate and reduce identified hazards to an acceptable level using control measures shown by evidence to be effective. The pre-chill microbiological monitoring program is a tool to generate such evidence for controls applied during evisceration and dressing.
The Preventative Control Plan must be written and include a description of identified biological hazards, the control measures used to address them and evidence demonstrating the effectiveness of those control measures. The pre-chill microbiological monitoring program results contribute directly to fulfilling this evidence.
The microbiological monitoring of poultry carcasses at pre-chill locations and comparison with post-chill locations will specifically help demonstrate that contamination is effectively minimized through evisceration and dressing process.
Operators can use sampling and testing procedures developed by provincial counterparts, industry associations, international partners or academic bodies if they can achieve the same outcome. The guidance must be tailored to a particular business, product or products and market requirements. The process must also meet foreign country requirements.
The pre-chill microbiological monitoring program should be integrated to the Preventative Control Plan supporting the Process Verification Monitoring Program for general E.coli- Biotype I for raw poultry as a complement, not a duplicate. The implementation of the pre-chill microbiological monitoring program should leverage the Process Verification Monitoring Program including processes such as random sampling principles, record-keeping systems or corrective action framework. This will ensure consistency and efficiency and avoid unnecessary duplication.
There’s a distinction in the sampling point and primary focus; the Primary Verification Monitoring Program assesses the overall process outcome by testing carcasses after chilling, which shows the effects of slaughter, dressing and chilling interventions. In contrast, the pre-chill microbiological monitoring program provides specific verification data on the controls applied during evisceration and dressing by sampling before chilling. This paired sampling approach (pre-chill and post-chill) allows for a direct assessment of the microbial change occurring between these two important points.
Food businesses must comply with the law. They demonstrate compliance by ensuring commodities and processes they are responsible for demonstrate compliance. If a written Preventative Control Plan is required, the food business develops a Preventative Control Plan with supporting documents, monitors and maintains evidence of its implementation and verifies that all control measures are effective.
CFIA verifies the compliance of food businesses by inspection and sampling.
For producers who want to learn how to use the pre-chill microbiological monitoring program, they can learn more on the CFIA’s website.
